mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Cover for Center Armrest|Page 12195 > < Removing and Installing/Replacing Cover for Center Armrest|Page 12193
Page 3
background image

Release screws (1) securing both cover trims of the center console to the instrument panel.
Tightening torque, 51 16 2AZ See: Specifications/51 16 Mirrors, Finishers, Ashtrays, Consoles.

Detach front center console to facilitate removal of console and cover trim for instrument panel.
Detach cover trims in direction (1) from instrument panel.
Detach cover trims in direction (2) from center console.

Disconnect plug connector for socket/cigarette lighter.
Remove console.

Installation:

Make sure foam blocks are correctly seated between center console and cover trims.

Important!

Make sure that cables are not trapped when installing the center console.

Removing and Installing/Replacing Ashtray Insert

51 16 156 - Removing and installing/replacing ashtray insert

Removing and Installing/Replacing Cover for Center Armrest|Page 12195 > < Removing and Installing/Replacing Cover for Center Armrest|Page 12193