Cooper Convertible (R52) L4-1.6L (W10) (2005)
Disconnecting hydraulic lines from cylinder:
Push open retainer (1) on cylinder with screwdriver.
Detach hydraulic lines (2).
Important!
Protect joints (lines and cylinder) against dripping fluid, e.g. with a cleaning cloth.
Observe hose markings.
Installation:
Fully open and close convertible top approx. 10 times in order to bleed the system.
Check fluid level See: Service and Repair/Procedures/Topping Up/Extracting Fluid, Checking Fluid Level.