Cooper Convertible (R52) L4-1.6L (W10) (2005)
Secure trim strip on tension bar with screws (1) (do not tighten down).
Adjusting trim strip in relation to window cavity cover strip:
Align trim strip with wedge to window cavity cover strip.
A = - 4.5 mm
Note:
Trim strips must be horizontally and vertically flush.
Tighten down screws in sequence.
Tightening torque 54 34 10AZ See: Specifications/54 34 Motor-Driven Convertible Top (Electrical Components).
Installation:
Carry out function test.
Tension bar must immerse flawlessly into body.
Trim strip seal must rest correctly on body cutout.