mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Front Cowl Panel Seal|Page 12855 > < Body - Convertible Top Design Changes|Page 12852
Page 1
background image

Convertible Top Weatherstrip: Service and Repair
Removing and Installing/Replacing Front Cowl Panel Seal

51 71 120 - Removing and installing/replacing front cowl panel seal

Note:

The operation is described on the left side; proceed in the same way for the right side.

Unclip clips (1) on seal (2).

Installation:

If necessary, replace faulty clips (1).
Make sure seal (2) is correctly seated in relation to adjoining trim parts (wind parts).

Release screws (1) on seal (2).
Pull off seal (2) at front of door openings, feed out at upper cowl panel and remove.

Removing and Installing/Replacing Front Cowl Panel Seal|Page 12855 > < Body - Convertible Top Design Changes|Page 12852