Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-2114001.png)
Tailgate Weatherstrip: Service and Repair
51 71 360 - Removing and installing/replacing seal for rear lid
Necessary preliminary tasks:
-
Open loading aid See: Roof and Associated Components/Convertible Top/Service and Repair/Procedures/Opening and Closing Loading Aid
(Easyload)
Detach seal (1) from rear lid cutout.
Installation:
Start fitting in area of filler elements (2).
Make sure filler elements (2) are correctly seated on tail panel studs.
Drain hole of seal in middle on rear lid cutout must not be clogged.
Note:
Seal (1) runs under convertible top up to B-pillar.
Detach seal (1) on left and right from body.
