Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1282002.png)
Collect brake fluid in a suitable container.
Disconnect plug connection (2) on brake light switch.
If necessary, disconnect plug connection on clutch switch.
Remove bracket (3).
Remove locking clip (1) and pull out pin (2).
Release nuts (3).
Installation:
Replace self-locking nuts
Tightening torque 34 33 1AZ See: Specifications/34 33 Brake Booster.
Unfasten screws (1).
Installation:
Tightening torque 35 11 1AZ See: Specifications/35 11 Pedal Assembly Console.
