Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1304002.png)
Disconnect brake hose (1) from brake line.
Installation:
Tightening torque 34 32 1AZ See: Specifications/34 32 Brake Lines.
Mount and tighten brake hose on brake caliper first, then on brake line/brake hose point of connection.
Pull brake hose out of retaining fixture (1) on shock absorber.
Release banjo bolt (1) and detach brake hose from brake caliper.
Installation:
Replace sealing rings.
Tightening torque 34 32 3AZ See: Specifications/34 32 Brake Lines.
