Cooper Convertible (R52) L4-1.6L (W10) (2005)
Brake Master Cylinder: Service and Repair
Replacing Expansion Tank for Hydraulic Brake Actuation
34 31 181 - Replacing expansion tank for hydraulic brake actuation
Note:
Read and comply with General Information See: Service and Repair.
Draw brake fluid out of expansion tank using a suction bottle.
Use a suction bottle used exclusively for drawing off brake fluid.
Do not reuse drawn out brake fluid.
Remove seal (1).
Press release tabs on left and right in direction of arrow and remove cover.
Disconnect plug connection (1).
Detach feed hose (2) for clutch hydraulics.
Note: