Cooper Convertible (R52) L4-1.6L (W10) (2005)
Remove hydraulic unit.
Installation:
Make sure that hydraulic unit is correctly seated in rubber mounts.
Replace damaged rubber mounts.
The control unit must be modified when the hydraulic unit is replaced.
-
Adjustment of steering angle sensor
-
Mix-up check of brake lines
-
Function check, hydraulic unit
Adjustment of steering angle sensor
Mix-up check of brake lines
Function check, hydraulic unit
Replacement:
-
Carry out programming/coding See: Testing and Inspection/Programming and Relearning/Vehicle Programming and Coding