Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1329001.png)
Yaw Rate Sensor: Service and Repair
34 52 550 - Removing and installing/replacing DSC yaw sensor (DSC sensor)
Necessary preliminary tasks:
-
Remove rear center console See: Body and Frame/Interior Moulding / Trim/Utility Storage Compartment/Service and Repair/Removing and
Installing Rear Storage Compartment.
Note:
The DSC sensor contains the functions of the transversal acceleration sensor and the rotation rate sensor.
Unlock and disconnect plug (1).
Release screws (2) and remove DSC sensor.
Installation Note:
Tightening torque 34 51 5AZ See: Specifications/34 51 Slip Control System (ABS, ASC+T, DSC).
Important!
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
