Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-526001.png)
Compression Check: Testing and Inspection
11 00 039 - Checking compression at all cylinders
Special tools required:
-
11 0 224 See: Tools and Equipment/11 0 220 Compression Test Kit
-
11 8 490 See: Tools and Equipment/11 8 490 Test Probe
Note:
Read out fault memory of EMS/DME control unit, check stored fault messages, rectify faults and clear fault memory.
Switch off ignition.
Caution!
High tension - danger!
Interrupt voltage supply to ignition coils.
Detach plug connector from ignition coil unit.
Press securing clip (1) away.
Detach plug connector (2).
