Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-537004.png)
1. - Tighten down all bolts in crankcase to jointing torque.
2. - Tighten down all bolts in crankcase with special tool 00 9 120 See: Tools and Equipment/00 9 120 Torque Angle Measuring Dial to torsion angle.
Installation Note:
Tightening torque 11 11 2AZ.
Remove crankcase.
Read off main bearing clearance with measuring scale.
Main bearing play.
-
Remove plastic thread.
-
Lubricate bearing shells and bearing shells.
Installation Note:
Always replace main bearing bolts.
Do not wash off bolt coating.
There must be no oil in the blind holes (risk of cracking).
