Cooper Convertible (R52) L4-1.6L (W10) (2005)
Valve Cover: Service and Repair
Removing And Installing, Sealing Cylinder Head Cover
Turn ignition off.
Disconnect hose (1).
Disconnect PCV valve (2).
Disconnect connector to coil pack (3).
Remove plug caps (twist and pull) (4).
Remove harness clips from cylinder head cover bolts.
Remove coil pack.
Remove 12 cylinder head cover bolts.
Remove cylinder head cover.
Install hint:
Replace cylinder head cover gasket if necessary.
Clean mating faces with a suitable material.