Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-589002.png)
Place special tool 11 8 290 See: Tools and Equipment/11 8 290 Extractor on crankshaft and screw in until is firmly contacts shaft seal (1).
Pull out shaft seal (1) by tightening screw.
Remove special tool 11 8 270.
Screw special tool 11 8 242 See: Tools and Equipment/11 8 240 Assembly Tool into crankshaft (see illustration).
