mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Switch Block in Instrument Panel|Page 10433 > < Diagram Information and Instructions|Page 10430
Page 1
background image

Control Assembly: Service and Repair
Removing and Installing/Replacing Switch Block in Instrument Panel

61 31 059 - Removing and installing/replacing switch block in instrument panel

Remove cover strips for front center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removing/Installing or
Replacing Trim Between Front Center Console and Instrument Panel.
Remove screws (1) and pull switch block towards front to release rear retaining clips. 

Detach plug connector (1) from switch block.

Important!

If the car has telephone provisions (optional extra), the plug connector is the same as that of the switch block in the instrument panel. Make sure the
correct plug connector is reconnected.

Removing and Installing/Replacing Switch Block in Instrument Panel|Page 10433 > < Diagram Information and Instructions|Page 10430