Cooper Convertible (R52) L4-1.6L (W10) (2005)
Combination Switch: Service and Repair
Removing and Installing/Replacing Fixture for Steering Column Stalk
61 31 006 - Removing and installing (replacing) fixture for steering column stalk
Warning!
Move wheels into straight-ahead position and do not alter this position during the repair work.
With steering wheel removed, do not under any circumstances turn/twist fixture for steering column stalk!
Necessary preliminary tasks:
-
Remove steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removing and Installing/Replacing Steering
Wheel
-
Remove lower section of steering column trim See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removing and
Installing/Replacing Lower Section of Steering Column Trim
-
Remove top section of steering column casing See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removing and
Installing/Replacing Upper Section of Steering Column Trim.
Warning!
Secure volute spring cassette (1) against rotating with adhesive tape (2).
If unauthorized rotation of volute spring cassette (1) cannot be ruled out, it is essential to return volute spring cassette (1) to center position!
-
Turn volute spring counterclockwise as far as it will go.
-
Turn volute spring clockwise as far as it will go.
-
Turn volute spring back to center position and secure so that centering pin (3) is at bottom position.