Cooper Convertible (R52) L4-1.6L (W10) (2005)
Tires: Testing and Inspection
00 00 ... - Tires: checking inflation pressure, correcting if necessary (incl. spare wheel), checking external condition (left/right), tread depth,
pattern
-
Checking tire inflation pressure:
-
Check tire inflation pressure in accordance with information plate on B-pillar
-
The inflation pressure in the spare wheel must be 0.5 bar higher than the maximum specified value on the information plate
-
If necessary, initialize Run Flat Indicator See: Tire Monitoring System/Service and Repair/Reset Procedure/Initializing Tire Defect Indicator
(RPA)
-
Checking tire condition:
-
Check tread depth of all tires with tire tread gauge
-
Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
-
Check tire tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with
customer and issue a separate invoice for this work
Note:
-
For details of approved wheel-tire combinations, refer to KSD CD
-
For reasons of driving safety, only use tires of the same type and tread pattern on a single vehicle
-
Inform customer of any incorrect or worn tires