Cooper Convertible (R52) L4-1.6L (W10) (2005)
Crankshaft Position Sensor: Service and Repair
12 14 521 - Replacing crankshaft pulse generator
Necessary preliminary tasks:
-
Switch off ignition
-
Read out fault memory of DME control unit
-
Check stored fault messages
-
Remove intake air manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
Unlock plug (1) and remove.
Unscrew bolt (2).
Remove impulse sensor.
Installation:
Replace sealing ring.
Tightening torque 13 62 2AZ.
Note:
Now clear the fault memory.