Cooper Convertible (R52) L4-1.6L (W10) (2005)
Fuel Gauge Sender: Service and Repair
Removing and Installing/Replacing Fuel Pump with Fuel Level Sensor
16 14 015 - Removing and installing/replacing fuel pump with fuel level sensor
Special tools required:
-
16 1 020 See: Tools and Equipment/16 1 020 Pin Wrench
Necessary preliminary tasks:
-
Draw off fuel from fuel tank See: Service and Repair/Procedures
-
Remove rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat - Through-Loading System/Removing and Installing or Replacing
Rear Seat
Push trim panel (1) forward.
Unscrew nuts (2).
Tightening torque, 16 11 2AZ See: Specifications/16 11 Fuel Tank and Mounting Parts.
Remove cover (3).