Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1058001.png)
Throttle Body: Service and Repair
13 54 030 - Removing and installing/sealing throttle assembly
Necessary preliminary tasks:
-
Read out fault memory of DME control unit.
-
Check stored fault messages.
-
Switch off ignition
-
Remove intake filter housing
-
Remove intake fitting (gaiter)
Unlock line of tank venting valve on throttle valve assembly and disconnect.
Unlock plug (1) and remove.
Loosen screws (2).
Remove throttle valve assembly (3).
Tightening torque 13 54 1AZ.
Installation:
Replace sealing ring (1).
