Cooper Convertible (R52) L4-1.6L (W10) (2005)
Oil Pressure Sensor: Service and Repair
12 61 280 - Removing and installing/replacing oil pressure switch
Necessary preliminary tasks:
-
Switch off ignition
-
Remove right front wheel See: Maintenance/Wheels and Tires/Wheels/Service and Repair/Removal and Replacement/Removing or Installing
Front or Rear Wheel
Warning!
Danger of scalding!
Carry out this work step only when the engine has cooled down.
Open oil filter cap so that oil can flow back into oil sump.
Tighten down oil filter cap.
Tightening torque 11 42 1AZ.
Unlock plug (1) and remove.
Release oil pressure switch (2).
Tightening torque 12 61 1AZ