Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1536004.png)
Release screws (1) on front axle support at front.
Installation:
Tightening torque 31 11 1AZ See: Specifications.
Release screws (1) from control arm bracket.
Installation:
Tightening torque 31 11 6AZ See: Specifications.
Tighten down screw (1) only after all other screws on the front axle support have been tightened down.
This will prevent the casing from being subjected to torsion stress.
