mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Wheel Cover|Service and Repair|Page 10125 > < Front Axle|Page 10121
Page 1
background image

Wheel Cover: Service and Repair

36 13 001 - Replacing a wheel trim

Steel wheels:

Insert plastic tip of wheel bolt wrench (1) between wheel trim and wheel and pry off trim.
In certain situations, it may be necessary to apply the wrench at several points around the circumference of the wheel to detach the wheel trim.

To fit the wheel trim, arrange the two retaining clips (1) over the wheel valve and press on the trim until it lies flush over the entire circumference of the
wheel.
Check again that the valve is fitted correctly in the trim, as illustrated (2).

Wheel Cover|Service and Repair|Page 10125 > < Front Axle|Page 10121