Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1136002.png)
Remove outer bearing (1) from clutch pedal.
Pull clutch pedal from pivot pin.
Remove inner bearing (2).
If necessary, carefully press hydraulic line (3) to one side slightly.
Important!
Note that there are different versions of the clutch pedal.!
Clutch pedal (1) (vehicles from 05/02) is curved in area (A).
Clutch pedal (2) (vehicles up to 05/02) is straight in area (A).
If a clutch pedal (2) for vehicles up to 05/02 is replaced, the bearing block must also be replaced.
