Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1154005.png)
Unscrew fluid sump mounting bolts in specified sequence (13-1) and remove fluid sump.
Tightening torque 24 11 3AZ. See: Specifications
Remove sump gasket.
Clean sealing surfaces.
Installation:
Tighten down screws fluid sump mounting bolts in specified sequence (1-13).
Replace oil sump gasket.
Make sure fluid strainer is correctly positioned on valve block.
