Cooper Convertible (R52) L4-1.6L (W10) (2005)
Wheel Bearing: Service and Repair
Replacing Bearing for Rear Wheel
33 41 180 - Replacing bearing for rear wheel
Necessary preliminary tasks:
-
Remove brake disk See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removing and
Installing/Replacing Both Brake Discs (Rear)
Release screw (2) and remove wheel speed sensor.
Installation:
Tightening torque 34 51 4AZ See: Brakes and Traction Control/Specifications/34 51 Slip Control System (ABS, ASC+T, DSC)
Release screws (3) and remove wheel hub.
Installation:
Tightening torque 33 41 1AZ See: Specifications/Rear Axle