Cooper Convertible (R52) L4-1.6L (W10) (2005)
Flywheel: Service and Repair
Removing And Installing Or Replacing Drive Plate (ECVT)
Special Tools Required:
^
11 2 150
^
11 8 320
Remove transmission.
Using special tool 11 2 150 and special tool 11 8 320 hold crankshaft damper in position.
Slacken bolts in sequence (8-1) and remove flywheel.
Installation:
Replace flywheel bolts.
Tighten in sequence (1-8).
Flywheel screws
M10 ................................................................................................................................................................................................................... 80 Nm
Installation:
Align crankshaft location mark (1) with flywheel location mark (2)