Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1215001.png)
Flywheel Gear: Service and Repair
Removing And Installing Or Replacing Flywheel
Special Tools Required:
^
11 8 320
^
12 2 150
Remove clutch.
Using special tool 12 2 150 and special tool 11 8 320 hold crankshaft damper in position.
Slacken bolts in sequence (8-1) and remove flywheel.
Installation:
Note location mark (1) on flywheel and location mark (2) on crankshaft.
Note Flywheel bolts must be replaced.