Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1254001.png)
Control Module: Service and Repair
24 61 501 - Removing and installing or replacing control unit
Disconnect battery See: Starting and Charging/Battery/Service and Repair/Procedures/Instructions for Disconnecting and Connecting Battery.
Remove nut and screw (1) securing bracket of control unit.
Tightening torque 24 61 1AZ .
Release bracket of control unit and detach plug connector (2).
Replacement only:
Unscrew nuts (3) securing bracket of control unit.
Tightening torque 24 61 2AZ .
Remove control unit (4) from bracket.
