mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

51 23 215 Removing and Installing/Replacing Cable For Front Hood/Bonnet Locks (In Engine Compartment) on Right and Left|Page 7659 > < Hood Latch Release|Service and Repair
Page 1
background image

Hood Latch Release Cable: Service and Repair
51 23 215 Removing and Installing/Replacing Cable For Front Hood/Bonnet Locks (In Engine
Compartment) on Right and Left

51 23 215 Removing And Installing/Replacing Cable For Front Hood/Bonnet Locks (In Engine Compartment) On Right And Left

Necessary preliminary work:

-

Remove both engine compartment lid catches

Unclip coupling (1) from lock carrier (2).

Open coupling (1) and disengage cable (3).

If necessary, release cable (4) from retainers at lock carrier (2).

Feed out coupling (1) with cable (4).

51 23 215 Removing and Installing/Replacing Cable For Front Hood/Bonnet Locks (In Engine Compartment) on Right and Left|Page 7659 > < Hood Latch Release|Service and Repair