mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Body and Frame|Fender > < 51 14 002 Removing and Installing/Replacing Front Mini Badge|Page 7691
Page 2
background image

Number and letter combinations (1) of the model designation are not connected to each other and are supplied on a carrier film (2).

IMPORTANT:

-

Adhesive areas must be dry and free of dust and grease.

-

Once it has been cleaned, do not touch the adhesive area with bare hands.

Remove liner (3) (protective strip for adhesive surface).

Firmly press down model designation.

Remove carrier film (2).

Body and Frame|Fender > < 51 14 002 Removing and Installing/Replacing Front Mini Badge|Page 7691