Cooper Convertible (R57) L4-1.6L (N12) (2009)
Important!
When removing the brake disc: On no account strike the friction ring with a hammer or similar object! If necessary, carefully tap with a rubber
hammer against the brake disc nave.
Release screw (1) and remove brake disc.
Installation Note:
Replace screw (1).
Tightening torque 34 11 1AZ See: Specifications/34 11 Front Brake.
Clean contract face of wheel hub thoroughly and remove any traces of rust if necessary.
Irregularities in the contact surface can cause distortion in the brake disc!
Removing and Installing/Replacing Both Brake Discs (Rear)
34 21 320 - Removing and installing/replacing both brake discs
Special tools required:
-
34 1 280
Important!
Always replace brake discs in pairs.
New brake pads must always be fitted when replacing the brake discs.
Necessary preliminary tasks:
-
Remove rear brake pads See: Brake Pad/Service and Repair/Removal and Replacement/Removing and Installing/Replacing Brake Pads on Both
Rear Disc Brakes