Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-431004.png)
Release bearing pin (1) on guide rail.
Tightening torque: 11 11 7AZ See: Specifications/Mechanical Specifications/11 11 Engine Block.
Installation Note:
Replace sealing ring.
Release central bolts of inlet adjustment unit (1) and exhaust adjustment unit (2).
Detach inlet adjustment unit from inlet camshaft.
Detach exhaust adjustment unit from exhaust camshaft.
Important!
-
Danger of mixing up adjustment units.
-
Mixing up the adjustment units will result in engine damage.
