Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-439001.png)
Camshaft: Testing and Inspection
11 31 005 - Checking camshaft timing
Special tools required:
-
11 9 540 See: Tools and Equipment/11 9 540 Gauge
-
11 9 590 See: Tools and Equipment/11 9 590 Plug Mandrel
Important!
Modified procedure for timing adjustment.
The timing is not determined at firing TDC of cylinder no. 1.
All pistons are in the 90° position.
Check locking of adjustment units.
Observe direction of engine rotation (direction of rotation always clockwise when viewed towards timing drive side).
Necessary preliminary tasks:
-
Remove cylinder head cover.
-
Remove front splash guard.
Important!
Danger of mixing up special tool bore.
