Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-454002.png)
Important!
Modified assignment of bearings.
Bearing (1) is at the output end (clutch end)
Bearings (1 to 5).
Bearing (2) is a guide bearing.
Important!
Clean sealing surfaces.
Do not clean sealing faces with a metal-cutting tool.
Clean sealing faces with special tool 11 4 470 only.
Insert guide rings (1) in crankcase at bearing block (2) with groove facing outwards.
If necessary, attach with engine oil to crankcase.
