mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Evaporator Core|Service and Repair|Page 6605 > < Diagram Information and Instructions|Page 6601
Page 1
background image

Evaporator Core: Service and Repair

64 51 590 - Removing and installing/replacing evaporator

Necessary preliminary tasks:

-

Remove heater See: Heater Core/Service and Repair/Removing and Installing/Replacing Heater

-

Remove heating element See: Heater Core/Service and Repair/Replacing Heater Core

Release screws (1).
Remove cover (2) with twin pipes (3) and gasket (4).

Installation:

Ensure gasket (4) is correctly seated.

Disconnect plug connection from temperature sensor (1).
Release screws (2) and remove cover (3).

Evaporator Core|Service and Repair|Page 6605 > < Diagram Information and Instructions|Page 6601