Cooper Convertible (R57) L4-1.6L (N12) (2009)
Move steering wheel into straight-ahead position and secure with steering wheel arrester.
Release screw (1).
Adjust toe-in to specified value by turning tie rod at hexagon (2).
Installation Note:
Make sure that gaiter (3) of tie rod does not turn as well.
Installation Note:
Tightening torque 32 21 2AZ See: Steering and Suspension/Steering/Steering Arm/Specifications.
Adjusting camber:
Slacken nut (1).
Slacken nuts (2).
Tightening torque 31 31 1AZ See: Specifications/Mechanical Specifications/Suspension/Suspension Strut / Shock Absorber/Spring Struts (Front).
Important!
Check stud (1) in elongated hole of spring strut dome for free travel.
Using a suitable tool, move stud or support bearing and adjust camber.
Adjusting Rear Axle
32 00 620 - Adjusting rear axle