Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-415002.png)
Note:
Pay attention to different tire markings:
-
Item (1) Marking denoting BMW-approved tires. Ensure that only BMW-approved tires are fitted.
-
Item (2) RSC is the abbreviation for Runflat System Component (runflat tires).
-
Item (3) Outside. The tire must be fitted so that the wording Outside is always situated on the outside of the rim.
Important!
Many tires are directional!
The arrow on the tire must point in the direction of travel for each wheel!
Models with M Mobility system
If the tire was filled with the M-Mobility system after a puncture, it will be necessary before removal to drill an approx. 25 mm dia. hole in the side wall
of the tire. Drain sealing compound from this hole and dispose of this compound in an environmentally responsible manner. Clean the disc wheel after
removing the tire.
Tire removal with a fitting machine:
Unscrew valve insert, discharge air, force off tire bead from rim flange with pressing-off horn of device on outside and inside.
If tire beads are stuck, first release the tire with the pressing-off horn at several points of the wheel before actually pressing off, apply tire mounting paste
