Cooper Convertible (R57) L4-1.6L (N12) (2009)
Unlock and detach plugs (1 and 2).
Unlock and disconnect line (3).
Carefully pull cable duct (4) upwards slightly.
Unlock plug (1) and remove.
Detach lock (2) and remove temperature sensor (3).
Installation Note:
-
Replace sealing ring
-
If necessary, add coolant See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Venting Cooling System and Checking for Water
Leaks
-
Check cooling system for water leaks See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
Note:
Now clear the fault memory.