Cooper Convertible (R57) L4-1.6L (N12) (2009)
System functions
The following functions are described for the power windows:
-
Opening / closing
-
Convenience opening and/or convenience closing
-
One-touch opening
-
Anti-repeat circuit
-
Anti-trapping protection
-
Load cut-off
-
Opening / closing on the Convertible
Opening / closing
The power windows may be operated from terminal R ON. With terminal R Off, the power windows can still be operated for approx. 1 minute. If a door
is opened, operation of the power windows is interrupted. To ensure that the side windows are securely closed, the power-window motors are briefly
moved to the blocked position (mechanical final stop) end in the upper stop.
The side windows can be opened and closed using the following actuating buttons:
-
Bank of switches in the centre console
-
Remote control
-
Door lock on the driver's side
Convenience opening and/or convenience closing
This convenience function is controlled by the Car Access System (CAS). The CAS sends the signal for convenience opening or convenience closing on
the K-CAN to the footwell module (FRM). This signal can be triggered using the remote control or the driver's door lock.
Convenience closing is activated when:
-
the remote control button remains pressed and held after locking/securing,
-
the mechanical key is kept in the "Lock" door lock position.
Convenience opening is activated using the same controls as convenience closing. Convenience opening is performed in the following order:
-
both front power windows
-
sliding/tilting sunroof after a time delay
If the activation is interrupted, the convenience function is halted.