Cooper Convertible (R57) L4-1.6L (N12) (2009)
Unlock plug connections and disconnect.
Release screws (1).
Push up lockplate (2) in direction of arrow.
Detach hydraulic lines.
Remove hydraulic unit.
Installation:
Hydraulic lines and connections are marked with numbers to prevent mix-ups.
Check fluid level See: Body and Frame/Roof and Associated Components/Convertible Top/Service and Repair/Procedures/Topping Up/Extracting
Fluid, Checking Fluid Level or top up if necessary.
Fully open and close convertible top a minimum of 10 times in order to bleed the hydraulic system.