mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Replacing Control Unit for Left Xenon Headlight|Page 330 > < Diagram Information and Instructions|Page 325
Page 1
background image

Headlamp Igniter Module: Service and Repair
Replacing Control Unit for Left Xenon Headlight

63 12 860 - Replacing control unit for left xenon headlight

Warning!

Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply
(lighting system and ignition off).
Work on the entire xenon lighting system (control unit, ignition unit with bulb) may only be carried out by specialist personnel.

Important!

Read and comply with notes on protection against electrostatic damage (ESD protection) See: Service Precautions/Vehicle Damage Warnings/Notes
on ESD Protection (Electro Static Discharge).

Necessary preliminary tasks:

-

Remove headlight See: Lighting and Horns/Headlamp/Service and Repair/Removing and Installing/Replacing Left Headlight (Xenon Headlight)

Release screws (1) and fold down control unit. Tightening torque 63 12 2AZ See: Lighting and Horns/Headlamp/Specifications.

Replacing Control Unit for Left Xenon Headlight|Page 330 > < Diagram Information and Instructions|Page 325