Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-101001.png)
Control Module: Service and Repair
24 61 500 - Removing and installing/replacing EGS control unit
Disconnect battery See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Disconnecting and Connecting Battery Negative
Lead.
Release bolt (1).
Detach retaining bar (2) from control unit.
Tightening torque 24 61 1AZ See: Specifications.
Disconnect plug (3) and remove control unit from mounting.
Important!
The adaptation values must be reset after the control unit has been replaced.
Note:
Illustration similar.
