Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-1277001.png)
Control Arm Bushing: Service and Repair
31 12 046 - Replacing bracket (with rubber mount) for left or right control arm
Warning!
Scalding hazard!
Wear gloves.
Necessary preliminary tasks:
-
Remove control arm See: Service and Repair/Front Axle/Removing and Installing Left or Right Control Arm
Mount control arm as pictured on press.
Heat rubber mount with hot air blower.
Note:
To ensure when pressing out the control arm that the inner sleeve of the rubber mount does not remain on the control arm pin.
Important!
Rubber mounts must always be replaced in pairs (JOHN COOPER WORKS).
