mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Transmission Cooler, A/T|Service and Repair|Page 4547 > < Torque Converter|Service and Repair|Page 4543
Page 1
background image

Transmission Cooler: Service and Repair

24 11 040 - Removing and installing/replacing transmission fluid cooler (AISIN)

Important!

After completion of work, check transmission oil level See: Fluid - A/T/Service and Repair.
Use only the approved transmission fluid.

Failure to comply with this requirement will result in serious damage to the automatic transmission!

Important!

No dirt is allowed to enter the oil circuit.

Failure to comply with this requirement will result in serious damage to the automatic transmission!

Necessary preliminary tasks:

-

Drain coolant See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair

-

Remove intake filter housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair

-

Remove intake filter housing gaiter.

Unfasten hose clips.
Detach coolant hoses (1) from transmission fluid cooler.

Transmission Cooler, A/T|Service and Repair|Page 4547 > < Torque Converter|Service and Repair|Page 4543