Cooper JCW Clubman (R55) Windshield Moulding / Trim Service & Repair
Windshield Moulding / Trim: Service and Repair
51 31 045 - Removing and installing/replacing trim on A-pillar, left or right
Necessary preliminary tasks:
-
Remove trim strip from side panel
Release door seal in A-pillar area.
Release screws (1).
Release trim (2) at clips (3) and remove.
Installation:
If necessary, replace faulty clips (3).
Trim (2) must not be damaged, replace if necessary.
Installation:
If necessary, release clips (2) from A-pillar (1).
Seal (3) must not be damaged.