Cooper JCW Clubman (R55) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1166001.png)
Brake Pedal Assy: Service and Repair
Removing and Installing Complete Bearing Block for Foot Pedal
35 11 000 - Removing and installing complete bearing block for foot pedal
Necessary preliminary tasks:
-
Remove lower instrument panel trim See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removing
and Installing/Replacing Bottom Right Trim for Instrument Panel
-
Remove cover for cowl panel See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Removing and Installing / Replacing Left
Cowl Panel Cover on left
After completing work bleed clutch hydraulic system See: Transmission and Drivetrain/Clutch/Clutch Hydraulic System/Service and Repair.
Draw off brake fluid until level is below connection to clutch master cylinder.
Detach feed hose (2) for clutch hydraulics.
Disconnect plug connection (1) on clutch master cylinder.
