mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing / Replacing Fuel Filter with Fuel Level Sensor (50-Litre Tank)|Page 4966 > < Removing and Installing / Replacing Fuel Filter with Fuel Level Sensor (50-Litre Tank)|Page 4964
Page 3
background image

Release screw cap with special tool 16 1 020 See: Tools and Equipment/Electrical / Mechanical Repair/16 1 020 Pin Wrench.

Installation:

Tightening torque 16 14 1AZ See: Specifications/16 14 Fuel Pump.

Raise unit.

Note:

To improve installation, secure cable (1) and lines (2 and 3) with cord.

Disconnect plug connection (1).

Unlock line (2) at quick-release fastener and detach.

Unclip line (3).

Carefully lift fuel pump with fuel level sensor out of fuel tank.

Installation:

Replace rubber seal (4).

Removing and Installing / Replacing Fuel Filter with Fuel Level Sensor (50-Litre Tank)|Page 4966 > < Removing and Installing / Replacing Fuel Filter with Fuel Level Sensor (50-Litre Tank)|Page 4964