Cooper JCW Clubman (R55) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1625001.png)
Seat Belt: Service and Repair
Removing and Installing/Replacing Rear Center Seat Belt
72 11 101 - Removing and installing/replacing rear center seat belt
Installation:
-
Microencapsulated screws (Loctite(R)) must be replaced and may not be reused
-
Screw connection must be completed within 20 mins. (start of curing)
-
Microencapsulated screws must not be retightened
-
Clean thread of nut beforehand in event of repeated use
Release screw (1).
Remove cover (2) for inertial reel mechanism.
Release screw.
Tightening torque 72 11 05AZ See: Specifications.
Installation:
