mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing Front Center Console|Page 13064 > < Removing and Installing Front Center Console|Page 13062
Page 8
background image

1AZ Bracket, handbrake console, to tunnel

M6.......................................................................................................................................................................................................................2.5 Nm

Removing/Installing or Replacing Trim Between Front Center Console and Instrument Panel

51 16 198 Removing/Installing Or Replacing Trim Between Front Center Console And Instrument Panel

Note:  Front center console and cover trims for front center console on instrument panel must be simultaneously removed and installed.

Replacing Front Centre Console

51 16 201 Replacing Front Centre Console

Necessary preliminary tasks:

-

Remove front centre console

-

Remove front cup holder

Remove on-board socket/cigarette lighter.

Note:  Inner section of on-board socket/cigarette lighter must be removed before lighting ring is removed.

Installation:
When installing lighting ring (1), make sure bulb holder is seated in opening (2) on underside of centre console.

Replacing Rear Centre Console

51 16 217 Replacing Rear Centre Console

Necessary preliminary tasks:

-

Remove rear centre console

Build date up to 07/2004:
Remove RDW switch (1).
Release screws (2) securing switches for front seat heating (depending on equipment specification).
Remove clips (3) from console.

Removing and Installing Front Center Console|Page 13064 > < Removing and Installing Front Center Console|Page 13062